© Street Furniture Australia Pty Limited
ABN 46 070 910 100
streetfurniture.com
Australia 1800 027 799
United States +1 877 406 6434
International +61 2 8774 8888
6
Email [email protected]
N6 391 Park Road, Regents Park
NSW 2143, Australia
additional information
LARGE CONFIGURATION
If you have ordered a large configuration with multiple connector panels
and PowerMe Tables, the process will be similar but it is key that the site
is prepared before installation begins. Most importantly, power must be
available for the PowerMe Tables.
Using the configuration to the right as an example, below are important
notes and steps for a successful installation.
POWERME™ TABLE CONDUIT LOCATIONS
If your Aria configuration includes multiple PowerMe Tables you will
receive a coordinate map, similar to the figure on the right, to enable
correct location of an underground electrical conduit to provide power to
the tables.
This is a very important step to ensure your configuration can be assembled
correctly. Connect the PowerMe Tables to power as the first step.
DELIVERY AND INSTALLATION
For large configurations, you will receive your order in modules with the
legs detached (in most cases). Proceed to assemble the configuration
onsite according to the signed off drawing.
It is highly recommended to fully assemble your configuration in its
correct location
BEFORE
surface or sub-surface fixing.
x
y
Note:
If your conduit will not come from
below surface but above ground,
suitable openings will be provided on
the PowerMe pedestal leg to allow
power in.
upper
modules
PowerMe Tables
(boxed separately)
