VISIT US ON THE WEB TO CHECK OUT MORE GREAT PRODUCTS —
www.strechplastics.com
STRECH PLASTICS ARE MANUFACTURERS AND DISTRIBUTORS OF THE HIGHEST QUALITY GOLF CAR PRODUCTS
STEP 11:
Install the U-shape seat
back support as shown
on both sides using 4 -
3/8” x 2 1/2” bolts with
4 - 3/8” nylock nuts
and 8 - 3/8” wash-
ers. The upper bolt
assembly requires a
3/8” fender washer on
each side as a spacer
between the U-shape
seat back support and
the arm rest supports
as shown. Only finger
tighten at this time.
STEP 12:
Install the top of the
deck support riser
brackets behind the deck
frame as shown using
2 - 3/8” x 1 1/4” bolts
4 - 3/8” washers and 2
- 3/8” nylock nuts. Make
sure the bottom bracket
hole is facing to the rear.
Only finger tighten at
this time.
14
ASSEMBLY
