4
W: www.streamline.systems E: [email protected] T: +44 (0)1626 830 830
W: www.streamline.systems E: [email protected] T: +44 (0)1626 830 830
5
Streamline® Warranty
The warranty on all Machines and Equipment is
for 1 year (12-months) from RECORDED DATE
OF PURCHASE.
THIS WARRANTY EXCLUDES NORMAL
MAINTENANCE ITEMS, including but not limited
to HOSES, FILTERS, O-RINGS,
DIAPHRAGMS, VALVES, GASKETS,
CARBON BRUSHES and damage to motors
and other components as a result of failure to
replace normal maintenance items. THIS LIST
IS NOT EXHAUSTIVE.
If Streamline
®
receives notice of such defects
during the warranty period, Streamline
®
will either, at its opinion, repair or replace
components which prove to be defective.
Replacement parts will only be supplied under
warranty, upon the inspection and approval of
the defective parts by Streamline
®
.
Should it be necessary to supply replacement
parts before the opportunity to inspect, these
will be charged at current prices and credit will
only be issued upon subsequent inspection and
warranty approval by Streamline
®
.
The customer is responsible for the cost of
return of the defective part. If warranty is
approved, Streamline
®
will pay for the cost
of the repaired or replacement part.
This warranty excludes the following conditions
and circumstances which are at the discretion
of Streamline
®
:
Wear and tear, misuse, abuse improper
maintenance, frost damage, the use of chemicals
other than those supplied or approved by
Streamline
®
, improper installation or repair,
unauthorised modification, incidental or
consequential costs, loss or damage, service,
labour or third party charges, the cost of
returning defective parts to Streamline
®
.
This warranty constitutes the exclusive remedy
of any purchaser of a Streamline
®
unit and is in
lieu of all other warranties, express or implied,
including without limitation any implied war-
ranty of merchantability or fitness for use, to
the fullest extent permitted by law. In no event
shall any implied warranty of merchantability or
fitness for use exceed the term of the applicable
warranty stated above and Streamline
®
shall
have no other obligation or liability.
Important
Unfortunately these rights cannot be
transferred to a third party.
STREAMLINE
®
Height Configuration
Maintenance
• The Streamrack is supplied in the low height configuration. It can easily be
changed to give additional height, ideal for being fitted over wheel arches.
• To change the height of the legs, first remove the 4x bolts holding the legs
onto the body of the racking on one side. Each leg has 2x bolts, fitted into
clinch nuts on the shelf unit.
• Once the bolts are removed, slide the legs down until the other set of hole’s
line up with the clinch nuts on the shelves.
• Re-fasten the bolts into the clinch nuts, ensure they are tight but take care
not to over-tighten as this may damage the unit.
• Repeat this for the legs on the opposite side.
• If water is spilled onto the device, wipe it clean with a dry, lint free, non-abrasive cloth to
prolong life
• Regularly check for excessive wear and tear, discontinue use if there is damage to any
fixings or fastenings on the unit.
General
