7
Notice aligning the
electrodes "+" and "-
Remove the back cover
Notices for remote controller:
①
Do not place the remote controller near the high temperature heat sources such as
electric carpet or heating oven.
②
Do not put the remote controller at the position directly exposed to the sunshine.
③
Be careful not to drop off from high position; otherwise it may be damaged.
④
There must have no barrier between signal receiver and remote controller of air
conditioner which may affect the receiving and transmitting of signal.
⑤
Do not splash the liquid such as water onto the remote controller.
⑥
Do not place the weight onto the remote controller.
Replacement of remote controller battery
In case of following conditions, it indicates the battery is used up; take out the used battery and replace with
new one.
①
There is no air conditioner receiving sound after transmitted the signal.
②
The display screen becomes obscure.
In case of above conditions, it indicates the battery is used up; take out the used
battery and replace with new one.
Note
: In case of operation failure of remote controller, please replace with new battery and
repeat the operation; if the failure still exists, please run the air conditioner in emergency
operation method, and contact the dealer or special maintenance points.
A. Remove rear cover and take out the used battery.
B. Replace the battery; notice the ”+“ and ”-“ electrode marks of battery.
C. Close the rear cover.
Note:
1. The new and used batteries must not be mixed.
2. Please take out the battery if the remote controller is not used for long time.
2.
Name of air conditioner components
2.Name of air conditioner components
