4
Operating Your Pole
HIGHLINE
™
6
W: www.streamline.systems E: [email protected] T: +44 (0)1626 830 830
W: www.streamline.systems E: [email protected] T: +44 (0)1626 830 830
7
Operating Your Pole
Assembly
To Use Your Power Pole
To Extend The Pole
To Retract The Pole
To Begin Spraying
To Stop Spraying
All
HIGHLINE™
power poles require some final assembly.
To protect the coupler and lance during shipping, these parts are shipped strapped to the extension
pole. Release the strapping and insert the aluminium end into the top clamp and pull the lever down
to secure it in position. Attach nozzle supplied with the pole to the quick coupler and ensure the
coupler collar releases to grip the nozzle.
Lift the pole levers and extend the pole section by section, starting from the second lever down.
Clamp each section once the desired length is attained. The first lever must remain locked at all
times to ensure constant grip is maintained on the aluminium insert holding the nozzle assembly.
Lift the pole levers and slide the sections in starting from the second last section until the pole is
fully compressed and then clamp each section securely again.
•
Start the pressure washer.
•
Raise the pole and keep the nozzle at least ten feet away from the surface to be cleaned. Keep
the pole clear of any power lines. Squeeze the trigger to begin spraying, maintain stable
footing, and move the pole in to the surface to be cleaned.
Before releasing the trigger gun move the nozzle at least ten feet away from the surface being
cleaning and make sure you have solid footing.
Connect the outlet of your pressure washer to the inlet port of the trigger gun of the
HIGHLINE™
Power Pole using appropriate quick couplers or fittings rated to handle high pressure.
DO NOT bypass, disable, or remove the trigger gun.
The
HIGHLINE™
Power Pole may be used fully retracted or fully extended or at any point in
between. Caution must be used when the pole is extended as the reaction force of the nozzle
spraying will cause the pole to flex.
Make absolutely certain that there are no power lines or sources ofelectrical power within 10 feet of
the lance at any time.
Contact with power transmission lines can cause fatal electrocution!
Do not extend or retract your
HIGHLINE™
Power Pole while spraying or under
pressure. Stop the equipment and relieve any pressure before making
adjustments to the extension pole or changing nozzles.
Except in cases of emergency, do not release the trigger whilst nozzle is near
to any surfaces.
Warning
Caution
Caution
Caution
The pole will rebound when the trigger is released or if pressure is lost,
USE
EXTREME CAUTION
when working on or near fragile surfaces as there may be
enough force to damage surfaces or break windows. Keep clear of power lines.
When you are clear of the work surface and in a safe area - release the trigger.
