Fully assembled fastening-system
Step 3:
Screw out the two rubber buffers on the side of the
seat until they make contact with the frame. Adjust the
rear buffers so they evenly make contact with the
frame.
Once the seat is completely adjusted, lock the height
of all rubber buffers by tightening the counter nuts
underneath the buffers.
Subsequently test if the seat can still be locked after it
was closed.
Step 4:
Look through the front gap between the seat and the
frame and screw out the front rubber buffer until it
evenly makes contact with the frame. Lock the height
by tightening the counter nut underneath the buffer.
Step 5:
Open the seat by lifting the front side of the seat until
the deadpoint of the hinge is overcome.
No warranty is given on damages or subsequent damages that were caused by an improper installation.
Due to legal reasons for decoration purposes only.