M-X5-GUI-8CH-2013_Q3
More information
www.streamaxtech.com
Copyright
2012-2014, Streamax Technology Co., Ltd
All Rights Reserved
All specifications are therefore subject to change without notice.
For TIMER type, if the setting for boot up time is 6:00:00 and shut time is 11:00:00, this means that the
MDVR only work from 6:00~11:00am every day and after 11:00 the MDVR unit will shut down
“automatically. The “shutdown delay” function is only for the IGNITION or TIMER setup.
MDVR will startup automatically during this period, but for recording it depends on the setting
in the SCHEDULE and RECORD MODE menu.
A)
IGNITION:
for shut down delay function. For example: If you make the shut down delay time is 5 min,
then MDVR will shut down after 5 minutes after the ignition is off.
B)
TIMER:
MDVR will boot up or shut down automatically at certain time configured every day.
C)
IGNITION OR TIMER:
means include both conditions.
BOOT UP TIME:
The exact time for MDVR starts to work every day.
SHUT DOWN TIME:
The exact time for MDVR shut down every day.
BOOT UP IN RECORDING TIME:
ON means timer start up function is linked to record function if you refer
to boot up the MDVR and start recording at the same time For example,
if the record schedule setup is from 6:00~8:00am, MDVR will boot up
and record automatically (if you setup this time on SCHEDULE
recording menu) during this period even the vehicle ignition is OFF.
BUZZER SWITCH:
ON means the buzzer will alarm when alarm happens, OFF means no audio when
alarm happens.
IDLE TIME (SEC):
How long the operation interface will switch to the QUAD view. If the user does
not make any operation on MDVR GUI for some time, the MDVR system will back
to the QUAD view automatically. We suggest that you please setup this idle time as
your setup demand. Once the MDVR access into the GUI, the MDVR will stop
recording.
EVENT FILES AUTO-EXPORT (USB):
When this switch is ON, you can back up all the alarm record files of
the current day to thumb drive by press F1 key on remote control.
OUTPUT MODE:
This is the output mode for monitor. There are 4:3 and 9:6 two options,
TRANSPARENCY:
Setup the brightness for the screen display as you want.
Scroll to
【
SAVE
】
to make the setting valid
