Stream iPod Dock Kit for Living Control - Installation and User Guide!
Page 7
Configuring the Dock Interface Box
Before installing the iPod Interface Box it needs to be addressed so that it
responds to requests from the RoomBox correctly.
Use a small screwdriver to rotate the selector switch to the output number
required. If there is a MusicBox or Studio in the installation set this to the
next available output after the last MusicBox/Studio output. For example,
with a MusicBox3, set the Interface box to
!
4
"
.
Important! : If the Interface box is being used with a RoomBoxNT the
address switch should be set to the output number re 1. i.e.:
for Output 4 set the selector switch to 5.
Note that on the RoomBox4 only outputs 1-4 are available.
Output Number selector switch
(Add 1 for RoomBoxNT)