27
PingBrother series EPIW100 user manual
2011 Mikroweb Internet ltd
.
EPIW104
User Manual
ver.1.3
PingBrother is watching your network devices
3.2 Reset the device
It is possible to reset all settings to the factory default, for example in case of a lost
password. The recovery steps are the following:
Power OFF
Press the reset button (Figure 1/1)
Power ON
Hold the reset button until all the four indicator LEDs are on (6-8 sec)
Release the reset button
After the reset the device’s IP address will be restored to the default:
192.168.1.234
3.3 Co-use with a standard 802.3af POE PD-s
PingBrother can power standard IEEE 802.3af-2003 POE devices, and properly works
with them under the following conditions:
The powered device (PD) is 802.3af Mode B (midspan) compatible
A 48V DC power supply is used to supply power to the PingBrother
The power of the PSU is scaled according to the type and number of the
powered devices
It is always recommended to perform testing before use.
