Streacom FICWS EVO, Руководство пользователя

Страница: 4 / 8

Removing the Top Panel
The top panel is held in place by 2 long screws that are
accessed from the bottom of the case. With the chassis
upside down, remove the 2 screws from either side. The
top panel can now be lifted off the chassis.
Removing the HDD Cage
The HDD cage is held in place by 6 screws, which are all
accessible from the top of the case. Remove all 6 screws
and lift the cage out of the chassis.
P4 - PREPARING FOR ASSEMBLY
Fitting Cooling Fan & IRRC Module (Optional)
The F1CWS Evo can accommodate a 40 or 60mm fan
(60mm may interfere with fitting of 2.5" HD, see HDD
installation). The fan bracket is packed with the other
screws and accessories. Fit your purchased fan with 2
screws as shown (Depending on 40 or 60mm). Fit the
fan assembly to the case using a single screw from
under the chassis.
The IRRC module can be installed into the position
shown (in red) using 2 screws supplied.
M3 x 5
M3 x 5
5 x 10
4 x 10
M3 x 5