STRAXGAS FLAIRE, Инструкции по установке и обслуживанию

Страница: 10 / 11

Flaire Issue 1.3 29/06/01 Page 10 of 11
casing by sliding the left hand edge forward, then to the right to clear the high level tap
spindle. Place carefully to one side.
3. Disconnect the two gas pipes at the high level tap by releasing the unions.
4. Undo the retaining nut securing the tap to the bracket and remove the tap.
5. Reassemble in reverse order.
6. Turn on the gas supply and check for soundness.
Replacement of main injector
1. Repeat operations 1 - 3, as described for 'Replacement of gas tap/FSD/piezo igniter'.
2. Remove gas pipe from gas valve to injector.
3. Remove screw securing slotted burner to the baseplate and lift off burner.
4. Unscrew injector and replace, making certain that the jet size stamping corresponds to
the specification on the Data Badge plate. Make sure that the injector union is not
overtightened, which could cause distortion of the mounting bracket. (Check that the
injector is parallel to the slots which retain the front coals).
5. Reassemble in reverse order.
6. Turn on the gas supply and check for soundness.
Replacement of ignition & pilot assembly
1. Repeat operations 1 - 5, as described for 'Replacement of gas tap/FSD/piezo igniter'.
2. Disconnect
thermocouple connection to the gas tap/FSD/piezo igniter.
3. Disconnect pipe from base of pilot burner tube.
4. Pull off connector on the base of the igniter probe.
5. Remove 2 screws on gas burner and remove ignition unit complete.
6. Fit new pilot assembly and reassemble in reverse order.
7. Turn on the gas supply and check for soundness.
8. Check operation of ignition system.
Fig. 7 Underside of burner
SPARE PARTS
When ordering spare parts please quote part numbers as listed below:
NATURAL GAS
Pilot tap & piezo for high level version BV50001
Off/high/low tap for high level version BV50369
Tap with piezo for low level version BV50000
Oxypilot assembly BA50004
Injector BI31000
Back ceramic BC11715
Front ceramic - set of 2 BC11716
Side ceramics L.H. & R.H. BC11717
Set of 9 loose coals BC50009