Stratus Zero-X Pro ZXMP-D500, Руководство пользователя

Страница: 26 / 42

24
13.3 OPTIMAL TRANSMISSION ZONE
For a great flight experience, make sure that your Drone is flying in front
of your remote control with no obstacles in between them.
NOTE FOR INDOOR FLYING:
• When flying indoors, please turn off the "GPS switch" of the remote control to
avoid the Drone getting out of control (this could be due to the weak GPS signal
indoors).
• The Optical Flow positioning system is typically activated and useful for indoor
environments when the GPS signal is weak or not available. The Optical Flow
positioning system works best when the Drone is less than 3 meters from ground
level, as the Drone has to continuously scan the ground. Please refer to the
"12.4 OPTICAL FLOW" on page 22 .
• You can connect to WIFI at this time to view real time video. Please refer to
"8.3 CONNECTING YOUR SMARTPHONE TO THE DRONE's WIFI" on page
17
on how to connect to WIFI.
13.4 UNLOCKING THE DRONE
Please ensure the Drone is kept on the ground with a safe distance
between you and the Drone before take off.
Press the
button
on the controller. The motor will start and the Drone
is now unlocked and ready for take off. The Drone will now automatically
unlock if there is no operation detected for
15 seconds
.
13.5 LOCKING THE DRONE
METHOD 1: After the Drone has landed
successfully, press the throttle stick
on the controller down and hold for
3
seconds . The Motors will stop rotating
and the Drone will be locked. (Refer
to
"6.0 THROTTLE CONTROL STICK
MODE" on page 15)
METHOD 2: The Drone will automatically lock if there is no operation
detected for
15 seconds
after unlocking or landing.