Stratus SAE-MS9000X, Инструкция по установке, эксплуатации и обслуживанию

Страница: 7 / 23

STRATUS Mid Rise Scissor Lift Installation & Operation & Maintenance Instructions
6
3.1.2 List for parts checking ---Annex 1
（
Packing list
）
Unfold the package and check if any parts missed as per Annex 1. Do not hesitate to contact us in case any parts missed,
but if you do not contact us and insist installing upon the lack of some parts, Friend as well as our dealers will not bear any
responsibility for this and will charge for any parts subsequently demanded by the buyer.
3.1.3 Ground conditions
The lift should be fixed on a smooth and solid concrete ground
with its strength more than 3000psi, tolerance of flatness
less than 5mm and minimum thickness of 200mm. In addition, newly built concrete ground must undergo more than
28days’ cure and reinforcement.
3.2 Precautions for installation
3.2.2 Joints of oil hose must be firmly connected in order to avoid leakage.
3.2.3 All bolts should be firmly screwed up.
3.2.4 Do not place any vehicle on the lift in the case of trial running.
3.3 Installation
Step 1: Remove the packaging and take the mechanical and hydraulic assembly to the designated installing place.
Please do read and understand this manual thoroughly before next step.
Step 2: Connect the oil hose to the pump assembly with a proper wrench. (Make sure the hose end is clean).
Step3: Connect the wires of limit switch to the wiring terminals in the control box. Make sure to connect NO.1 wire
with NO.1 terminal, NO.2 wire with NO.2 terminal and so forth.
Step4: Link the air hose to compressed air source. (This step is only for the type with pneumatic safety lock)
Step 5: Fix the base frame. (Optional)
This FL-8803 is portable. In other word users may use it without having it placed and fixed on the ground. Nevertheless, if
you want to have it fixed, do fix it on a smooth and solid concrete surface.
Step 6: Trial testing with load. (Do not use cars for trial testing)
Load applied shall not exceed 2500KG.
This step is of particular importance for it can check if the oil hose and air hose are well connected. Connections are qualified
when there is no abnormal sound or leakage after having been tested for 2 or 3 times.