Stratus ftServer V 2302, Руководство по планировке объекта

Страница: 50 / 80

Network Connections
4-2 Stratus ftServer V 2302, V 4304, and V 6308 Systems: Site Planning Guide (R624)

Stratus ftServer V 2302, V 4304, and V 6308 Systems: Operation and
Maintenance Guide
(R625) for detailed information on modem connections.

OpenVOS System Administration: Configuring a System (R287) for information on
the
devices.tin
file entries required for an RSN connection.
Network Connections
The following sections provide site-planning information for networks:
C A U T I O N !
Make sure network cables can be routed out of the way of
foot traffic.
M I S E E N G A R D E
!
Vérifier que les câbles réseau peuvent être acheminés en
dehors du passage.

“Site Ethernet Networks” on page 4-2

“Ethernet Subnet Requirements” on page 4-3

“Maintenance Network” on page 4-3
Site Ethernet Networks
For connections to one or more optional Ethernet site networks, you must provide the
following:

site Ethernet ports, hubs, or switches

Ethernet cables
You connect a site network to the ftServer system using any available Ethernet ports
in the embedded adapters or the Ethernet PCI adapters (U578V Quad-Port Copper
Gigabit Ethernet Adapters or U776V Quad-Port Fiber Gigabit Ethernet Adapters).
N O T E
Two Ethernet ports are typically paired and teamed in
software for fault tolerance. Each member of the pair
requires an Ethernet cable. For information on teaming
the Ethernet ports in software, see the
OpenVOS
STREAMS TCP/IP Administrator’s Guide (R419).