Stratus ftServer 2500, Руководство по планировке объекта, Страница: 34 / 106

Monitor Requirements
2-4 Stratus ftServer 2500, 4400, and 6200 Systems: Site Planning Guide (R609)
Monitor Requirements
If you are using a monitor that is not supplied by Stratus, make sure that:

The monitor accepts universal 100–240 volts AC (VAC), 50/60 Hertz (Hz) power.

The VGA cable has a 15-pin D-sub connector.

The power cord for the monitor is long enough to reach the power source.

The plug type on the power cord is compatible with the external power source at
the site.
ftSSS for VMware vSphere does not support the uninterrupted use of a
directly-attached VGA monitor, except during installation of VMware ESX and ftSSS.
See
“Management PC Requirements” for information about the alternative method for
directly connecting to ftServer systems running VMware ESX.
Management PC Requirements
For ftServer systems running ftSSS for VMware vSphere, you must provide a computer
to be the management PC. The computer must have:

A serial port

Terminal emulation software installed.The emulator must be able to transmit
keystrokes such as F1 and F2 to interact with the BIOS.
A serial cable connects the management PC to the ftServer system’s COM2 port to
allow you to directly manage the ftServer system. Use the vSphere Client to manage
the server, but also provide serial access to the system from a management PC. You
can provide this access either from a computer that is located near the ftServer system
and directly attached by the serial cable, or from a computer that is connected to the
ftServer system through a serial port concentrator.