2
JUNE 2021
Assembly
Safety
SS-10081
LIGHT DUTY FOLDING
WORKBENCH
TOOLS REQUIRED:
Phillips Head Screwdriver
Hammer
Adjustable Spanner
STEP 1:
Use bolts (#9) washers (#3) and nuts
(#10) to connect crossbars (#4) and
leg frames (#5).
STEP 2:
Use woodscrews (#8) to connect slide
bases (#2) and work-tops (#1).
STEP 3:
Fit leg frames (#5) into slide bases (#2) -
line up holes in slide base with holes in
leg frame insert bolts (#3) and washers
(#7) from outside of the base and attach
washers (#7) and nuts (#11) from inside.
Use screwdriver and adjustable spanner
to tighten screws.
STEP 4:
Attach plastic feet (#6) to the legs (#5).
Each foot must be attached with longest
side at outer corner which is indicated by
arrow inside
STEP 5:
Select suitable holes on the work-tops to
fix chocks (#12)
WARNING:
• Do not use as a ladder
• Do not stand on work bench
• Load capacity max. 68kg
PLEASE CAREFULLY NOTE THE FOLLOWING:
• When assembling, ensure rubber feet are correctly attached to legs and securely
tighten all bolt and screw assemblies.
• Never exceed recommended maximum weight capacity of work-tops (68kg).
• Always lower heavy loads onto work-tops gently, so that strain is taken up gradually.
• Use only on level surface to ensure stability.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
