Stratasys uPrint, Руководство по обслуживанию, Страница: 237 / 383

5-28
28.
Add the lengths derived from steps 25 and 26 (C-E and E-G) and then subtract the width
of circle E derived from step 27 . Record this total as “GLR”
29.
Measure and record the distance from the outside edge of circle A to the outside edge of
circle E. See Figure 5-330.
Figure 5-330: Measuring distances from outside edges of A and E
30.
Measure and record the distance from the outside edge of circle E to the outside edge of
circle I. See Figure 5-331.
Figure 5-331: Measuring distances from outside edges of E and I
31.
Measure and record the diameter of circle E along the center line between A and I. See
Figure 5-332.
Figure 5-332: Measuring diameter of circle E