Stratasys uPrint, Руководство по обслуживанию, Страница: 196 / 383

uPrint/uPrint SE Service Manual 4-149
Z Motor
Required Tools
•
5
⁄
16
” nut driver or standard screwdriver.
•
3
⁄
32
” allen wrench.
•
9
⁄
64
” allen wrench.
• Cutters
Hardware
• Wire ties (x2)
• 10-32
x
3
⁄
8
” slotted screws (x4)
• 4-40 x
1
⁄
4
” slotted screws (x8)
• #4 Split lock washer (x4)
• #4 SAE washer (x4)
Removing the Z motor
1.
Remove the top panel. See Removing the top panel on page 4-5.
2.
Remove the side panels. See Side Panels on page 4-7.
3.
Remove the upper electronics bay cover. See Removing the upper electronics bay cover
on page 4-17.
4.
Remove the electronics bay. See Removing the electronics bay on page 4-19.
5.
Using a
5
⁄
16
” nut driver or standard screwdriver, remove the 4 Z stage panel mounting
screws and remove the Z stage panel. See Figure 4-260.