STRAT
AIR
- Modelltechnik GmbH, Batthyanystrasse 1, A-2454 Trautmannsdorf, Tel: +43(664)5178282,
www.stratair.com
, UID-Nr.: ATU 612 284 88, FN : 253148 b
5
Pushrods for ailerons and flaps are preinstalled. Just connect servos to receiver or tester and
pushrods will be visible.
Flap horn installation & glueing.
Aileron horn installation & glueing
Neutral position of aileron servos should be neutral of aileron. Never the less it can vary
because of different RC-products.
Neutral position of flap servos = 30° flap down. Flap is in neutral if you move servo to around
-120%. +120% = 60° flap down.
Use 2 pcs. M3 screws to connect wing-fuselage. In the back of the wing tape the small tongue of
the wing with fuselage
Powe RC:
Motor and ESC cables as short as possible
Battery Setup:
Motor battery can be installed from the front or through the opening in wing area.
Max. dimensions:
- 34x43x230mm
- 37x37x230mm
