Assemble the Bungies under the Seat Deck.
5A
Join the Seat and Back Decks together.
5B
Lay the Seat Deck sticker-side down.
Screw the Bungees
to the side of the two
inner rails, using the
pre-drilled holes.
Lay both Decks out flat on the floor
with the stickers facing upwards.
The Seat Deck fits inside the
Back Deck as shown. Slip the
Long Clevis Pin through the
small end of the Plastic Runner,
through the hole in the Back Deck and
the corresponding hole in the Seat Deck.
Secure with a Washer and Locking Pin.
M i s s i o n R i m
S t r a t a F u r n i t u r e
Page 5 of 8
Assembly Instructions for all sizes.
MR 0901
Bungie
Screw
Inner Rail
Screw
Inner
Rail
Bungie
Screw
Screw
Sticker
- facing the floor
Seat Deck
Long Clevis Pin
Sticker
- facing upwards
Plastic
Runner
Long Clevis Pin
Plastic
Runner
Back Deck
Seat Deck
Sticker
- facing upwards
Sticker
Sticker
Lock the Clevis
Pin with a washer
and Locking Pin
