Strand Acclaim LED Series, Руководство пользователя

Страница: 7 / 24

UsEr mAnUAl
w w w. s t r A n D l i g h t i n g .co m
AcclAim lED Zoomspot
7
2
InsTallaTIOn
1
AcclAim lED Zoomspot
9850-000840-00
OVerVIeW
acclaim leD Zoomspot (black body)
64511-002 912400576887
POWER CONNECTOR
QUICK START GUIDE
(this document)
WARRANTY CARD
INCLUDED ITEMS
This document provides basic setup instructions and safety
warnings for the following product(s):
QUicK stArt
powEr
wArrAntY
InsTallaTIOn anD seTUP
CLAMP
HANGING
BRACKET
1 2
4
3
6
5
MOUNTING
The unit should be mounted via its screw holes on the bracket. Always
ensure that the unit is fi rmly fi xed to avoid vibration and slipping while
operating. Always ensure that the structure to which you are attaching
the unit is secure and is able to support a weight of 10 times of the unit’s
weight. Always use a safety cable that can hold up to 12 times the weight
of the unit when installing the fi xture.
The luminaire must be mounted by professionals.
QUICK reFerenCe DMX MaPs
DMX
CHANNEL
PARAMETER
1 Intensity (16-bit high)
2 Intensity (16-bit low)
3 strobe
4 red (16-bit high)
5 red (16-bit low)
6 Green (16-bit high)
7 Green (16-bit low)
8 Blue (16-bit high)
9 Blue (16-bit low)
10 lime (16-bit high)
DMX
CHANNEL
PARAMETER
1 Intensity (16-bit high)
2 strobe
3 red (16-bit high)
4 Green (16-bit high)
5 Blue (16-bit high)
1 lCD display - shows menu and selected function
2 Buttons:
MenU - to select programming functions
DOWn - to go forward in selected functions
UP - to go backward in selected functions
enTer - to confi rm the selected function
3 POWer In - connects to power supply
4 POWer OUT - connects to next fi xture
5 DMX In - 5-pin Xlr cable to link the DMX
console
6 DMX OUT - 5-pin Xlr cable to link next fi xture
GOBO HOLDER INSTALLATION
acclaim leD Zoomspot gobo holder (B-size) 912400576897 64511-012
To install the gobo holder:
Step 1. Loosen the two screws at A and move the shading plate backward. Tighten the two screws to fix it.
Step 2. Snap the gobo holder into the luminaire.