USER MANUAL
WWW. ST R A N D L I G H T I N G .CO M
ACCLAIM LED CYC
11
DMX MENU
Address
To select DMX Address, press the ENTER button to confirm. Use the UP/DOWN button to adjust the address
from 001 to 512, press the ENTER button to store. Press the MENU button back to the last menu or let the unit
idle one minute to exit menu mode.
DMX Mode
To select DMX Mode, press the ENTER button to confirm. Use the UP/DOWN button to select 8 - Bit or 16 - Bit,
press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to
exit menu mode.
Data
To select Data, press the ENTER button to confirm. Use the UP/DOWN button to select Ch1 – Intensity xxx(val-
ue), Ch2 – Intensity Fine xxx(Value), …. All functions, press the ENTER button to store. Press the MENU button
back to the last menu or let the unit idle one minute to exit menu mode.
Dmx Fail
To select Dmx Fail, press the ENTER button to confirm. Use the UP/DOWN button to select DMX Hold or
Blackout, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one
minute to exit menu mode.
MANUAL MENU
To select Manual, press the ENTER button to confirm, use the UP/DOWN button to select Red, Green, Blue and
Lime. Use the UP/DOWN button to adjust the value from 0 to 255, press the ENTER button to store. Press the
MENU button back to the last menu or let the unit idle one minute to exit menu mode.
SETTINGS MENU
To select Settings, press the ENTER button to confirm, use the UP/DOWN button to select LED, Display On Time
and Reset Defaults.
LED
To select LED, press the ENTER button to confirm. Use the UP/DOWN button to select Dimming Curve, Output
Mode, Color Calibration, Fan Mode and Refresh Rate. Press the ENTER button to store. Press the MENU button
back to the last menu or let the unit idle one minute to exit menu mode.
Dimming Curve — To select Dimming Curve, press the ENTER button to confirm. Use the UP/DOWN button to
select Square Law, S Curve or Linear, press the ENTER button to store. Press the MENU button back to the last
menu or let the unit idle one minute to exit menu mode.
Output Mode — To select Output Mode, press the ENTER button to confirm. Use the UP/DOWN button to select
Standard, Studio or Whisper, press the ENTER button to store. Press the MENU button back to the last menu or
let the unit idle one minute to exit menu mode.
Color Calibration — To select Color Calibration, press the ENTER button to confirm. Use the UP/DOWN button to
select On or Off , press the ENTER button to store. Press the MENU button back to the last menu or let the unit
idle one minute to exit menu mode.
Fan Mode — To select Fan Mode, press the ENTER button to confirm. Use the UP/DOWN button to select On
or Auto, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one
minute to exit menu mode.
Refresh Rate — To select Refresh Rate, press the ENTER button to confirm. Use the UP/DOWN button to select
500Hz, 1000Hz, 1500Hz, 2000Hz, 2500Hz, 3000Hz, 3500Hz, 4000Hz, press the ENTER button to store. Press
DMX OUTPUT
0
255
100
LIGHT OUTPUT
DMX OUTPUT
0
255
100
LIGHT OUTPUT
DMX OUTPUT
0
255
100
LIGHT OUTPUT
LINEAR
S-CURVE
SQUARE LAW
Содержание ACCLAIM LED CYC
Страница 1: ...ACCLAIM LED CYC USER MANUAL...
