STRALUS SLLS002, Руководство пользователя

Страница: 8 / 32

Essential Information
1
8
1.4 Transportation Position
To move this product the operator must fi rst place
the bed in the transportation position. A step by step
guide to moving your Stralus bed can be found in
Section 3.1
The transportation position defi nes the following
conditions. The bed may only be moved once all
these conditions have been met.
NOTE ON STABILITY AND BUMPS:
This product has been designed to function on slopes of
less than 10 degrees. Transportation through
environments outside this should not be attempted. If the
operator is unsure of the environment they must consult
their facility manager.
— Not Supporting an Individual: The bed is not
supporting an individual or any other person in
any manner. This includes lying, sitting, leaning
or resting on the bed.
— Not Supporting a Load: The bed may not
have any additional load other than mattress,
linen, accessories and style packs when in the
transportation position.
— Maximum Height: The bed is at its maximum
height before transportation.
— Back and Head Rests are Flat: Both the back
and leg rests must be completely fl at.
— Resident Lockout Activated (If Applicable):
If the bed is equipped with an attendant control
panel (ACP) the resident lock out should be
enabled.
— Power cable is stored safely and correctly:
See Section 3.2