Operating instruction Z7520 Compact-temperature-controller
I
Temperaturregelgeräte
5
STRACK NORMA GmbH & Co. KG · Königsberger Str. 11 · D-58511 Lüdenscheid · Tel +49 2351 8701-0 · www.strack.de
08.2018
2. Safety advice
1. Please read this advice carefully.
2. Keep this operations manual for use near the machine.
3. This is an electral device driven with high voltage, please respect
the usual VDE- and safety regulations.
Mains voltage and every voltage greater than 42 volts is
dangerous!
4. Connect to a power source following the identification plate on
the device.
5. Avoid contamination of the interior with debris, liquids or sprays.
Risk of short-circuit, fire or electric shock !
6.
Before dismantling the controller insert from the frontpanel,
remove the blocking screw (upper side of the carter, red
point), switch mains power off and prevent unintentional
restart.
Put blocking screw in place after having restored the insert!
Non-compliance with this advice can cause contact to
dangerous high voltage inside the device!
7. Don‘t place the device on hot machine surfaces or near radiation
sources of hot parts.
8. Keep the power connection cable clear of hot parts or sharp
edges.
9. Disconnect the power cable immediately, if
- it was damaged,
- liquid or parts penetrated the device,
- the device was damaged by falling down or other mechanical
impacts,
- you have the suspicion of any malfunction.
