Stow CD605E16 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 76

background image

PAGE 18 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08)

WARNING

Failure to thoroughly inspect the diamond
blade (Figure 11) for operational safety
could result in damage to the blades or
the saw and may cause injury to the user
or others in the operating area.

Figure 11. Diamond Blade

BLADES

Saw blades, or cutting disks, are available in either an abrasive
design or as diamond blades. Either blade will work on the
STOW CUTTER 1 SAW , however, diamond blades are
recommended. Ask your dealer about your specific cutting
application.

SAW BLADE INSPECTION

1.

Stress Relief Holes (Gullets)

- Check the steel core for

cracks that may have propagated from the slots and/or
gullets. Cracks indicate extreme fatigue failure and if sawing
continues, catastrophic failure will occur.

STOW CUTTER 1 SAW — BLADES

2.

Edge of the Steel Core

- Check the diameter edge for

discoloration (blue oxidation) indicating an overheating
condition caused by insufficient cooling water/air.
Overheating of blades may lead to loss of core tension and/
or increase the possibility for blade failure. Make sure the
steel core's width is uniform about the rim of the blade, and
not succumbing to an "under-cutting" condition brought
about by highly abrasive material or improper under-cutting
core protection.

3.

Directional Arrow

- Ensure that the blade is oriented

properly on the blade shaft for sawing. Reference the
directional arrow on the blade and place it so the direction
of rotation "downcuts" with the turn of the shaft.

4.

Diamond Segment or Rim

- Ensure there are no cracks,

dings, or missing portions of the diamond segment/rim.

DO

NOT

use a blade that is missing a segment or a portion

of the rim.

Damaged and /or missing segments/rims may

cause damage to your saw or injury to the user or others in
the operating area.

5.

Specifications

- Ensure that the blade specifications, size,

and diameter properly match up to sawing operations.
Utilizing a blade not matched properly to the task may result
in poor performance and/or blade damage.

6.

Arbor Hole

- It is essential that the arbor hole diameter

properly matches the blade, and that it is free from distortion.
Correct blade flanges (collars) must be used. The inside
face of the flanges must be clean and free of debris. An out-
of-round arbor condition will cause damage to the blade
and the saw.

7.

MAX RPM

- This RPM reference is the maximum safe

operating speed for the blade selected.

NEVER

exceed the

max RPM on the diamond blade. Exceeding the maximum
RPM is dangerous and may cause poor performance and
may damage the blade.

«
...
16
17
18
19
20
...
»

Содержание CD605E16













































































Отзывы:

Нет отзывов

Похожие инструкции для CD605E16

Бренд: Dimas Страницы: 23

EX-TRAFIRE 100SD

Бренд: THERMACUT Страницы: 60

Бренд: Vollrath Страницы: 12

Бренд: Huawei Страницы: 24

Бренд: ES manufacturing Страницы: 5

Бренд: Partner Страницы: 16

Бренд: Partner Страницы: 11

Бренд: Varimixer Страницы: 6

Бренд: Scheppach Страницы: 88

Бренд: UCHIDA Страницы: 58

Бренд: MADER Страницы: 64

Бренд: MADER Страницы: 81

Бренд: PANDROL Страницы: 19

Бренд: SAHINLER Страницы: 44

Бренд: Baileigh Страницы: 40

Бренд: Gardeo Страницы: 83

Бренд: Echo Страницы: 18

Бренд: IDEAL Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды