INSTALLATION INSTRUCTIONS
Connect to the electricity supply
For hobs that are supplied/manufac-
tured with a 13Amp supply cord and
Plug only.
Warning: Ensure that the power rating
of the appliance is compatible with a
13Amp supply beore connecting to the
electricity supply. i.e. 2.8kW.
Warning: This appliance must be
earthed.
The fl exible mains lead is supplied con-
nected to a BS 1363 fused plug, the plug
is fi tted with the correct fuse.
Replace only with a fuse of the same rat-
ing and type.
The wires in the mains lead are coloured
in accordance with the following code:
Green and yellow = Earth,
Blue = Neutral,
Brown = Live.
As the colours of the wires in the
mains lead for the appliance may not
correspond with the coloured markings
identifying the terminals in your plug,
proceed as follows:
1. The wire which is coloured green and
yellow must be connected to the terminal
marked E (Earth) or coloured Green.
2. The wire which is coloured blue must
be connected to the terminal marked N
(Neutral), or coloured Black.
3. The wire which is coloured brown must
be connected to the terminal marked L
(Live), or coloured Red.
The plug and socket must be accessible
after installation. Should the mains lead
of the appliance ever require replacing,
we recommend that this is carried out
by a qualifi ed electrician who will replace
it with a lead of the same size and
temperature rating.
Important: - ensure that you route all
mains and electrical cables and fl exible
tubing well clear of any adjacent heat
source.
Under no circumstances should the mains
electric cable be allowed to come into
contact with hot oven fl ues or similar
surfaces and keep well clear of any
moving parts that may be in the vicinity
of the installation, such as cooling fans on
adjacent appliances.
