Installation Instructions
Step 3: Check edging strip
The edging strip is factory fitted to
the front side edges of the appliance
front frame. This strip provides the
c a b i n e t r y with extra protection from
any escape of heat.
When installing the product, ensure
that the edging strip is correctly located
on the outer edges of the front frame,
before positioning and securing the
appliance to the cabinet.
When securing the appliance, the
fixing screws provided are driven
through the edging strips into the
cabinet - the seal will straighten up
and sit flush to the cabinet when the
screws are fully home.
Step 4: Secure appliance into
housing unit
Insert appliance into cabinet.
Note:
The unit housing the appliance
must be appropriately fixed.
To secure appliance to housing unit
Note:
Ensure that the appliance is
centrally located.
Take care not to damage the appliance
or cabinet.
There are 6 securing screws.
l
Open the grill / top oven door,
and screw 2 screws through the
top corner holes in the front frame.
l
With the grill / top oven door still
open, screw 2 screws through the
holes in the front frame, located
under the grill compartment.
Close the grill / top oven door.
l
Open the main oven door, and
screw the remaining 2 screws
through the bottom corner holes in
the front frame.
Close the main oven door.
27
seal
front frame
door
handle
08 27349 00 - Howdens 90FP 24/4/07 8:15 Page 29
