Stove Builder International Valcourt FP10 Lafayette, Инструкция по установке и эксплуатации

Страница: 35 / 97

FP10 Lafayette - Installation and Operation Manual
35
6.2 Regulations Covering Fireplace Installation
When installed and operated as described in these instructions, the FP10 Lafayette wood fireplace is
suitable for use in residential installations. The FP10 Lafayette wood fireplace is not intended for installation
in a bedroom of a mobile home.
In Canada, the CSA B365 Installation Code for Solid Fuel Burning Appliances and Equipment and the CSA
C22.1 Canadian National Electrical Code are to be followed in the absence of local code requirements. In
the USA, the ANSI NFPA 211 Standard for Chimneys, Fireplaces, Vents and Solid Fuel-Burning Appliances
and the ANSI NFPA 70 National Electrical Code are to be followed in the absence of local code
requirements.
NOTE: The Fireplace is not approved for use with a so- called “positive flue connection” to the clay tile of
a masonry chimney.
6.3 Fireplace Installation
BEFORE INSTALLING YOUR FIREPLACE, YOU MUST INSTALL THE TWO SPACERS AND THE HEAT SHIELD ON
TOP AND THE TWO SPACERS ON THE BACK OF THE FIREPLACE.
The spacers and the heat shield are in the firebox of the fireplace and the screws are with the manual kit.
Using the screws provided, install the two spacers (A) and the heat shield (B) on top of the fireplace and the
two spacers (C) on the back of it.