Stove Builder International AC02786, Руководство по установке

Страница: 6 / 8

Page 6
SECTION 4 - INSTALLATION
1. Determine the appliance position following manufacturer’s recommendations.
2. Determine necessary dimensions for the floor protection.
3. Using masking tape, draw on the floor the contour where the floor protection will be installed.
4. Align one panel (A) , matching the rear marks of step 3. Make sure the panel is centered with
the corner of the wall.
5. Next step, install the panels (B) and (C) with the panel (A) , as shown in the following figure.
6. Continue the installation by joining the panel (D) with the panels (B) and (C) . Make sure all
panels are properly connected and aligned
Figure 3 : Panels installation