Storz 8404ZX Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 60

Storz 8404ZX Скачать руководство пользователя страница 21

Preparation

Instructions for use • C-MAC Monitor • CFH518_EN_V1.0_12-2021_IFU_CE-MDR

21

The discharged battery is fully charged after approx. 3 hours when the device is switched off. If
the battery is charged while the device is switched on, this will increase the charging time.

5.3.1 Connecting the power supply unit

NOTICE

Damage due to incompatible charger

The product may be damaged if an incompatible charger is used.

Only use chargers supplied by KARL STORZ.

1.

Insert the connector for the power supply unit into the socket on the monitor.

2.

Secure the connector using the swivel nut.

3.

Plug the power supply unit into the wall socket, holding onto the plug housing, not the
cable itself.

ð

The monitor is connected to the power supply.

ð

The green indicator on the power supply unit lights up.

ð

The orange status LED lights up.

ð

The battery charges.

5.3.2 Disconnecting the power supply unit

Pull on the plug housing to disconnect the power supply unit. Never pull directly on the
cable.

5.3.3 Replacing the power supply unit adaptor

The power supply unit can be adapted to country-specific power sockets by using
exchangeable adaptors.

«
...
19
20
21
22
23
...
»

Содержание 8404ZX





























































Отзывы:

Нет отзывов