background image

23

22

Take care never to screw the 
black Filling Chamber Cap di-
rectly onto the heat exchanger.   

Only the orange Filling Chamber is in-
tended to be screwed onto the heat ex-
changer. 
If this warning is disregarded, the Fill-
ing Chamber Cap may become de-
formed. 
 

Take care that the Screens 
are not obstructed with plant 
material. To guarantee opti-

mal results, we recommend cleaning 
the Screens after each vaporization 
cycle with the enclosed Cleaning 
Brush. 

Afterwards, screw the Filling Chamber 
Cap with the Cooling Coil back onto 
the Filling Chamber. 

8. FILLING THE FILLING CHAMBER

Heating the 

PLENTY

 Hot Air Generator 

Screw the Filling Chamber with Cool-
ing Coil and Mouthpiece onto the Hot 
Air Generator and heat it up. This 
ensures that both the Filling Cham-
ber and the vaporization material are 
preheated and the vaporizing can be-
gin as soon as the heating process is 
completed.
 

If the auto off release handle is 
not activated or pressed after 
heating, then the Hot Air Gen-

erator will cool down again after the set 
temperature is reached. 

Caution! Hot surface! 

 

After using the 

PLENTY

 Va-

porizer, do not touch any com-
ponents of the Filling Cham-

ber until they have cooled down again, 
except for the textured surface and the 
handles provided for this purpose. 
Once the Hot Air Generator has 
reached the set temperature (the or-
ange control lamp turns off, or the 
thermometer displays the desired 
temperature), the inhaling process 
can then begin. 

9. APPLICATION

Содержание Plenty



















Отзывы: