SN900
On this product, data is stored on an internal hard disk.
Dismantling
1. Using the Phillips screwdriver, unscrew the 2 black countersunk screws located at the back
of the cover.
2. Remove the cover by sliding it backwards.
This operation will tear the warranty sticker.
IMPORTANT
Closely follow the instructions and precautions for handling the hard disk given in the vendor’s
installation guide.
3. Locate the hard disk:
4. Remove the adhesive strip from the hard disk
5. Unplug the SATA connector.
6. Using the Phillips screwdriver, unscrew the 4 fastening screws from the hard disk support,
keeping the associated hex spacer in place with a flat wrench.
7. Remove the hard disk & support setup.
8. Unscrew the 4 lateral screws of the hard disk with a Philips screwdriver.
9. Retrieve the hard disk.
SNS - TECHNICAL NOTE
SECURE RETURN OPTION
Page 12/28
sns-en-secure_return_option_technical_note - 10/10/2020
