P.6
Save
2.4Ghz 6 Channel Transmitter and Receiver
Click “Save” button to save your current parameter settings into a file and stored
on your computer. You can save more than one settings.
Left click the “Save” button to save the parameter settings.
Click “GetUser” button to import the current settings from the transmitter to
computer.
Please click “GetUser” ASAP after the correct COM Port is selected, or your
settings on the transmitter will be override.
Open
Click “EndPoint” button to set the each channel travel range, from 0%-100%.
Left click the “EndPoint” button to set each channel’s Travel Range.
Default is 100%.
EndPoint
Click “Reverse” button to set each channel’s direction. You may reverse the
direction of the particular servo to make it work in the correct direction.
Left click “Reverse” to set channels’ direction.
Reverse
Click “Subtrim” button to fine tune each channel’s trimming, usually for center-
ing the servos. Range from -120 to 120 (Do not use excessive sub-trim values
or it may overdrive the servo’s maximum travel.)
Left click “Subtrim” to fine tune each channel’s trimming.
Subtrim
System Setting
