1600 Series USB Navigation Keypad
Technical
Manual
Appendix 1 – Configuration Utility
The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is
confidential and is not to be used for any purpose or disclosed to any third party without the express and written consent of
Keymat Technology Ltd., Copyright 2015. All rights reserved.
1600 Series USB Navigation Keypad Tech Manual Rev 1.2 Jan 2021
www.storm-interface.com
Page 6 of 18
Installing & Using The Configuration Utility
The host application requires .NET framework to be installed on the PC and will communicate over the
same usb connection via the HID-HID data pipe channel, no special drivers are required.
Windows OS
Compatibility
Windows 8,
Works OK
Windows 7,
Works OK
Windows Vista,
Works OK
Windows XP
Only if you install .NET framework
Windows ME and
earlier
Not investigated
The utility can be used to configure the following features:
•
LED On/Off
•
LED brightness (0 to 9)
•
Load customised keypad table
•
Write default values from volatile memory to flash
•
Reset to factory default
•
Load Firmware
