Page 4
SKU 97563
For technical questions, please call 1-800-444-3353.
speciFications
Construction Materials
Upright Posts: Stamped and Formed 16 Gauge Steel - Q’ty 4
Side Sway Bars: Tubular Steel
L - Shaped Safety Pins and Other Hardware: Zinc Plated Steel
Shelves: Stamped and Formed Steel
Maximum Weight per
Shelf
600 lb
Shelving Section
Dimensions
22-1/2” L X 13-7/8” W X 1-1/16” H - Q’ty 15
unpacking
When unpacking, check to make sure that the item is intact and undamaged. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
set up instructions
read the entire iMportant saFety instructions section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
note:
For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram near the end of this manual.
assembly
.
note: use two persons to assemble this storage rack.
the upright posts
(2) are directional, the slots must face inward (see Figure 2 on page 5).
Figure 1
Upright Post (2)
Nut (5)
Long Rod (8)
Short Rod (3)
Long Rod (8)
Cross Beam (6)
Assemble two of the Upright Posts (2) using three of the horizontal Short Rods
(3), and two of the Long Rods (8). Use six Bolts (1), twelve Flat Washers (4),
1.
2.
