Stage 1.
Secure the seat base to side panel at 380mm from end
of post to bottom of seat support.
Use 4 x 70mm screws, 2 at each end.
Ensure that top rafter is facing outside of assembly.
Fix second side panel in similar manner.
Use 4 x 70mm screws , 2 at each end.
Stage 2.
Stand arbour upright and fix seat back into
angled slots provided in seat base support.
Use 2 x 25mm screws for each side to secure
seat back into angled joint with seat base.
Stage 3.
Fit back trellis panel by placing on the horizontal seat
support and then fixing into corner posts with 2 x
50mm screws on each side.
Secure the seat back support by screwing two 70mm
Screws through the back trellis panel frame ( one each
Side) into the seat support .
Stage 4.
Fix horizontal top back support to post,
Flush with top of posts using
4 x 50mm screws, 2 at each end.
.
