background image

IMPORTANT SAFETY INSTRUCTIONS

FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL MAY RESULT  
IN INJURIES OR DEATH. SAVE THESE INSTRUCTIONS FOR FUTURE USE.

ATTENTION

PRODUCT IS NOT RECOMMENDED FOR OUTDOOR USE. THE PARTICLE BOARD SHELVES 
SHOULD BE SEALED WITH A WATERPROOF SEALANT OR PAINT WHEN USED IN HUMID 
ENVIRONMENTS TO PROTECT FROM MOLD.

TOOLS REQUIRED

1. Hammer
2. Rubber Mallet

Read all Instructions before assembly.

This product is suitable for indoor use only. Warranty is void if 
used in wet or excessively humid conditions.

This unit should be securely anchored to the wall with  suitable 
fasteners, which are NOT included.

Units should be placed on a level surface. Failure to do so can 
result in poor product performance or create a possible safety 
hazard. Avoid assembly on carpet.

Do not use this product for anything other than the 
manufacturer's intended purpose. Do not stand on the unit or 
use it as a ladder!

Evenly distribute the weight on each shelf and keep the  
heaviest loads on the bottom shelf. 

Use care when working with metal parts. The use of safety 
gloves is strongly recommended.

It is recommended that at least two people assemble  
the unit together.

3

180º 

1

2

Содержание 2611S120















Отзывы: