StorageTek L180, Руководство по обслуживанию

Страница: 91 / 266

95897 Fifth Edition 4-1
4
Removal and Replacement
This chapter provides the procedures to remove and replace the field
replaceable units (FRUs) within the L180 Tape Library which includes:
• “AC Power Distribution Unit” on page 4-5
• “DC Power Supply Assembly” on page 4-9
• “Operator Panel” on page 4-15
• “Cartridge Access Port Motor” on page 4-20
• “Hand-Camera Assembly” on page 4-29
• “Fan Tray Assembly” on page 4-35
• “MPC Card” on page 4-39
• “MPU Card” on page 4-49
• “MPW Card” on page 4-53
• “MPV Card” on page 4-56
• “Theta Motor” on page 4-65
• “Z Motor” on page 4-76
• “Z Flex Cable” on page 4-84
• “Library SCSI Cable” on page 4-90
• “Drive SCSI Y Cable” on page 4-95
• “DLT Tape Drive” on page 4-99
• “Super DLT” on page 4-106
• “DLT Drive Power Supply” on page 4-111
• “IBM Ultrium Tape Drive” on page 4-117
• “HP Ultrium Tape Drive” on page 4-124
• “Seagate Ultrium Tape Drive” on page 4-130
• “Restoring Operation” on page 4-136
Note: To replace the 9840 Tape Drives, refer to the 9840/T9840/T9940 Tape
Drive Service Reference Manual, for instructions.