Storage Options Scroll Elite, Инструкция по эксплуатации, Страница: 14 / 32

14
NETWORK CONNECTIVITY
The vast majority of applications support some kind of networking / Internet functionality. There are two ways to
connect to the Internet using Scroll Elite; either through your wireless router (access point) or by plugging in a 3G
network dongle.
11.1 – CONNECT TO A WIRELESS ACCESS POINT
Scroll Elite features standard wireless B / G / N capabilities, meaning it can connect to any router which is compatible
with the 802.11b/g/n standard. Check your router’s documentation to confirm compatibility.
NOTE
You will need your router’s wireless SSID and password to continue with these instructions.
To enable wireless networking and connect to your router:
1. Go to “Settings”

“Wireless & Networks”

“Wi-Fi” and slide the Wi-Fi switch to the right to enable it.
2. After a few seconds, Wi-Fi will be enabled and a list of available wireless network names (SSID) will appear.
Locate your wireless network on the list and touch to select it.
3. You will be asked for the password. Type it in using the keyboard which automatically appears on screen.
TIP
If you do not know your wireless password, please refer to your router’s instruction manual, or contact
your Internet Service Provider (ISP).
4. Touch the “Connect” option to complete setup of your wireless connection.
NOTE
Advanced users can touch “Show advanced options” to set up a proxy and / or manual IP configuration.
An icon will be displayed in the status bar to show wireless connection status:
Full signal Moderate signal Weak signal
Once you are connected to a wireless network, you can select it on the list, to view connection details (e.g. signal
strength, link speed and IP address). You can use the “Forget” option to disconnect from the network and remove
the stored password.