5
B - FRAME INSTALLATION (Refer to figure 2 for these steps)
Figure 2
1.
Connect the
Three way fitting
(part code 1), the
Top bent tube
(part code 3) and
the
Sidewall bent tube
(part code 4) with the
Bolts M8x70
(part code 13); these
make the
external group of arches
.
DO NOT
install the bolts on the top of the truss
where the fabric will rest.
2.
Connect the
Four way fitting
(part code 2), the
Top bent tube
(part code 3) and the
Sidewall bent tube
(part code 4) with the
Bolts M8x70
(part code 13); these make
the
internal group of arches
. Please NOTE the direction of the bolt.
DO NOT
install
the bolts on the top of the truss where the fabric will rest.
3.
Insert one end of the assembled arch into one base plate and force the other end
of the arch into the opposite base plate. Secure the arches in the base plates using
the bolts.
4.
After installing the first two arches, connect the
Top roof purlin
(part code 5) into
the
Three way fitting
and the
Four way fitting
using the
Butterfly bolt
(part code
14).
5.
Then connect the
Connection purlins
(part code 6) on the arches using the
Bolts
M8x70
(part code 13). There are 4 pieces of
Connection purlins
(part code 6) and
one piece of
Top roof purlin
(part code 5) between each arch.
6.
Then install the third arch into the base plate and connect the purlins. Assemble
the arches one by one until the frame is finished.
