7
C - ROOF COVER INSTALLATION
NOTE:
DO NOT install the cover onto the frame of your building in high wind conditions. A
slight breeze is the most advantageous for cover installation. To take advantage of the
breeze, pull the cover up over the arches with the breeze blowing in the cover like a sail
filled with air.
1.
Insert the
Tensioning tube
(part code 10) into the pockets on the end of the
roof
cover
(part code 13). Then put the
Plastic plugs
(part code 15).
Figure 6
2.
Put the
Roof cover
(part code 13) EVENLY, CAREFULLY AND SLOWLY atop the
frame. Adjust the cover so that it is square and evenly centered on the frame.
Figure 7
