7
C - ROOF COVER INSTALLATION
NOTE:
DO NOT install the cover onto the frame of your building in high wind conditions. A
slight breeze is the most advantageous for cover installation. To take advantage of the
breeze, pull the cover up over the arches with the breeze blowing in the cover like a sail
filled with air.
1.
Insert the
Lower tensioning tube
(part code 7) into the pockets on the end of the
roof cover
(part code 8). Then put the
∮
32 Plastic plug for end of tensioning tube
(part code 12).
Figure 4
2.
Put the
Roof cover
(part code 8) EVENLY, CAREFULLY AND SLOWLY atop the frame.
Adjust the cover so that it is square and evenly centered on the frame.
Figure 5
