background image

78

Chapter 9

 Upgrading

To prepare a downloaded ZIP file for a local upgrade

Copy the file to the root directory of a USB memory stick or on a CD-ROM.

To prepare a downloaded ISO file for a local upgrade

Create the installation CD-ROM for the engines with a CD-burning application that can 

correctly read and burn the CD-structure stored in the 

.iso

 images. If the end result is 

a CD-ROM file with the original 

.iso

 file on it, the CD-ROM cannot be used for 

installation.

Upgrading or Generating Licenses

When you installed StoneGate for the first time, you installed licenses that work with all 
versions of StoneGate up to that particular version. If the first two numbers in the old and the 
new version are the same, the upgrade can be done without upgrading licenses (for example, 
when upgrading from 1.2.3 to 1.2.4). When either of the first two numbers in the old version 
and the new version are different, you must first upgrade your licenses (for example, when 
upgrading from 1.2.3 to 1.3.0). By default, licenses are regenerated and installed automatically. 
You can also upgrade the licenses at the Stonesoft website.

Upgrading Licenses Under One Proof Code

A license file generated under one POL code contains the license information for several 
components. You can also always use the multi-upgrade form to upgrade the licenses (see 

Upgrading Licenses Under Multiple Proof Codes

 (page 79)).

To generate a new license

1.

Browse to the Stonesoft License Center at 

www.stonesoft.com/license/

.

2.

Enter the POL code in the 

License Identification

 field and click 

Submit

. The license page

opens.

What’s Next?

If you are sure you do not need to upgrade your licenses, you are ready to upgrade the 
sensor and analyzer engines. Continue by 

Upgrading Engines Remotely

 (page 82), or 

Upgrading Engines Locally

 (page 84) depending on whether you are going to upgrad

the engines remotely through the Management Server or locally at the engine site.

Otherwise, continue by 

Upgrading or Generating Licenses

.

What’s Next?

If you do not need to upgrade licenses and you want to upgrade the sensor and analyzer 
engines remotely through the Management Server, proceed to 

Upgrading Engines 

Remotely

 (page 82).

If you do not need to upgrade licenses and you want to upgrade the engines locally at 
the engine site, proceed to 

Upgrading Engines Locally

 (page 84).

If you need new licenses and you want to upgrade the licenses one by one, proceed to 

Upgrading Licenses Under One Proof Code

 (page 78).

If you need new licenses and you want to upgrade several licenses at once, Proceed to 

Upgrading Licenses Under Multiple Proof Codes

 (page 79).

Содержание stonegate 5.2














































































































Отзывы: