Stonesoft stonegate 5.2, Руководство по установке

Страница: 26 / 109

26
Chapter 4 Configuring NAT Addresses
3. Right-click Locations and select New Location . The Location Properties dialog opens.
4. Type in a Name .
5. Select element(s).
6. Click Add .
7. Repeat steps 5-6 until all necessary elements are added.
8. Click OK .
Repeat to add other Locations as necessary.
Adding SMC Server Contact Addresses
The Management Server and the Log Server can have more than one contact address for each
Location. This allows you, for example, to define a contact address for each Internet link in a
Multi-Link configuration for remotely managed components.
 To define the Management Server and Log Server contact addresses
1. Right-click a server and select Properties . The Properties dialog for that server opens.
What’s Next?
 If your Management Server or Log Server needs a contact address configuration,
proceed to
Adding SMC Server Contact Addresses (page 26).
 If you plan to add contact addresses only for Sensor or Analyzer elements, proceed to
Defining Sensors and Analyzers (page 31).
5
6
1