14
SM0974202 A 04
System manual
9.1. Set MirrorEye 1 Layout,
See
Figure 5.
1. Camera MirrorEye 1 Left Side; Article No. 0106001
2. MirrorEye 1 12.3” Monitor unit, Driver;
Article No. 0212000
3. Camera MirrorEye 1 Right Side; Article No. 0106011
4. MirrorEye 1 12.3” Monitor unit, Passenger;
Article No. 0212500
5. Vehicle Display Controller; Article No. 1001743
9.2. Camera and monitor mounting positions
The camera position must as far to the front of the Vehicle
as possible, see figure 5, to ensure that the class IV image
can be captured, see also figure 10, page 12. For drilling
template camera bracket see page 17.
The monitor position can be determined according to the
table below and the dimensions according to figure 12.
Class
Location
Design viewing
Design viewing
Distance ORP
angle horizontal
angle vertical
to monitor
Class II
driver
-5
-5°
80 cm
Class IV
driver
-5
5°
80 cm
Class II
passenger
0
-2°
191 cm
Class IV
passenger
0
2°
191 cm
Figure 12
The specified dimensions and angles are based on
the Stoneridge-Orlaco test vehicle, these installa-
tion dimensions apply only for vehicles with similar
dimensions, actual dimensions and angles are speci-
fied for each type of vehicle by Stoneridge-Orlaco.
1
2
3
4
5
1
2
3
4
1
2
Ocular Reference Point
45
30
Ocular Reference Point
A Pillar
A Pillar
A Pillar
Dimensions in mm
200
3100
Seat rails
745
745
Seat rails
200
Set Article number: 0415000
