4
Examine the wall you want to install the mount to before you start installation. Make sure that there
are no hidden power supply cables, water pipes or other objects hidden in the wall.
NOTE:
A dedicated power circuit is recommended for the unit. Additional electrical appliances on
the same circuit may exceed the current (amperage) rating for that circuit.
Plastic Base Installation for Free Standing Option:
1.
Do not connect the appliance to a power source until properly fixed to the stand and the
instructions are fully read.
2.
Remove front glass panel.
3.
Place the heater unit laying down on a flat clean surface.
4.
Align the 6 predrilled holes on the bottom of the heater to the 6 holes on the plastic base
(Diagram 1).
5.
Using the provided 6 small screws attach the plastic base to the heater. Make sure screws
are tight to avoid the heater from tipping once upright (Diagram 2).
6.
Carefully lift heater upright (Diagram 4).
7.
Place the front glass panel (Diagram 3) onto the heater (Diagram 4) by engaging the 4
grooves on the side brackets on the front glass panel to the 4 fixed bolts on the sides of the
heater base unit (Diagram 5 & 6). NOTE** the front glass panel is not permanently fixed
to the base unit. Do not try to lift the appliance by the front panel.
