All rights reserved by STONE Technologies
STAD133WT-15 Equipment Manual
Release 01/2019
7
protocol) and other commonly used peripherals. One of them is
multiplexed with the capacitive touch interface.
2.3 USB-DEVICE Interface
DEV interface is USB-DEVICE interface. This interface can only be used
for system programming and ADB debugging.
2.4 GPIO Interface
GPIO interface, only support 5V5 signal pin.
Note: The triangle head is identified as pin 1 of the interface. The interface is built-in.
PIN
Definition
1
GND
2
GPIO3_D3-U
3
GPIO3_D1_U
4
GPIO4_B1_U
5
GPIO3_D0_U
2.5 Network Interface
The
STAD133WT-15 is a 100M adaptive Ethernet interface that is brought
out via RJ45. If you want to use Android's Ethernet function, you need to
plug the network cable into the ETH interface and then turn on the
Ethernet function by setting. The default Ethernet is DHCP-assigned IP. If
you want to manually configure the IP address, you can configure it in the
advanced settings.
2.6 HDMI Interface
HDMI is a high-definition screen interface with 4 sets of differential lines.
The HDMI mark is printed on the enclosure. Users can connect multiple
display sizes. The default resolution is 1920 * 1080.
