5.
Safety and maintenance Recommendations
5.1 Safety recommendations
Helmet
For safe riding, always wear a bicycle helmet.
Tires
Inspect the wear of your tires on a regular basis and verify the tire pressure
at least once a month. Tire pressure: 40-65 PSI depending on the weight of
the user.
Wheel-rims
Take care of any risk of damage in case of defective wheel-rims. Swap them
immediately when the rim is worn out.
Important: braking distance increases on humid or slippery ground
Gears
Like the chain, the freewheel must be kept clean and well lubricated. If the chain
has become worn and needs to be replaced, it is likely that the freewheel will also
have become worn and should be replaced as well. Take the chain off the
freewheel and rotate it with your hand. If you hear a grinding noise or the
freewheel stops suddenly after spinning, it may need to be adjusted or replaced.
Battery
Cf. Chapter. 4
WARNING: As with all mechanical components, the bicycle is subjected to wear
and tear caused by usage over time. Different materials and components may
react to wear or stress fatigue in different ways. If a component is worn, it may
suddenly fail possibly causing injuries to the rider. Any form of crack, scratches or
change of color in highly stressed areas indicate that the component should be
replaced.
5.2 Maintenance
Caution:
Bike maintenance and repair require specific skills and appropriate tools. Do not
repair your bike or change any of its settings if you have the slightest doubt
regarding your ability to correctly proceed with such work. Any adjustments or
repairs that are not properly done can damage the bike and lead to accidents
resulting in extensive injury. Use only genuine replacement parts for safety-
critical components and contact your dealer when necessary.
12
12
Premium Electric
Bikes
Stone Mountain
Bike
Co.
| 4975 Stone Mountain Hwy 78, Suite 100, Lilburn, GA 30047
Bryce 650 OWNER’S MANUAL
