© The Stone Bake Oven Company 2015. All rights reserved.
Step 1:
Select a location for your Mezzo 76. If outdoors, avoid any windy, exposed areas.
Oven Stands:
- If using the oven in its core form (Mezzo 76 Go), you can purchase a metal,
weatherproof stand from The Stone Bake Oven Company online shop.
- You can build a brick or block work stand to place the oven on: Ensure at least
3 sides of the oven are supported by at least 103mm of brick or block work(1
household brick thickness).
- You can build a wooden stand, however you MUST adhere to the safety
precautions below:
! IMPORTANT INFORMATION WHEN BUILDING A WOODEN STAND:
- There MUST be a non-combustible, concrete layer of a minimum thickness of
150mm in between the oven and the wooden frame.
- The wooden stand MUST be a wooden frame only, no wood is to run beneath the
floor of the oven.
- Please ask The Stone Bake Oven Company for the oven stand advice guide for
further detail on wooden base construction.
! WARNING: Failure to adhere to these guidelines when building a wooden stand
may result in fire.
Step 2:
Bearing your oven clearances in mind, set the oven base parts down on the Mezzo
pre-constructed base. Ensure the oven base is facing the correct way up before
setting down so that the grooves (to place the dome in) are showing. To ensure
the oven floor is installed level, you can bed under the base pieces using sand or
fire cement for a level finish, then place the oven dome on top. For a full how-to
assembly video, visit our website.
!
Handle the oven parts gently, rough set down may result in oven chipping.
Step 3:
Slot the flue length into the pre-prepared flue hole. Please note this may be a tight
fit. Simply sand around the flue hole using medium course sand paper if flue insertion
is too challenging. Place the oven cap on top of the flue length. Your oven is now
ready to use!
TOP TIP: For a black/coloured flue finish, simply purchase high heat coloured matte
spray stove paint and follow pack instructions. Simple!
