SECTION 6 : Maintenance
•
Do not perform any kind of maintenance while the e-Bike is charging .
•
Attempting to repair or modify your e-Bike can void all warranties. Only authorized repair centres may
service the e-Bike. If you need assistance please contact customer service.
6.1 : Tire Inflation
**
You will need a pressure gauge, a standard bicycle pump to inflate the LAN2620 e-
Bike’s
tires.
Step 1.
Ensure the e-Bike is powered off and stable, so it
doesn’t
move during inflation.
Step 2.
Visually inspect the tires for damage, scuff, or puncture marks. If the tires is damaged, DO NOT
INFLATE IT. Contact customer service immediately.
Step 3.
Find the valve located on the inside of the wheel and remove the cap.
Step 4.
Use a standard bicycle pump to pump air to the tires slowly.
Step 5.
Use the pressure gauge periodically to check PSI.
Step 6.
When the tires reaches 40-65PSI /2.8-4.5BAR, stop inflating and replace the valve cap.
Step 7.
Repeat with other tire.
•
Any PSI marking on the tires indicates a maximum. DO NOT inflate the front tire to this value, only inflate it
to 65PSI as directed above.
•
Underinflation is strongly recommended if you intend to ride outdoors in temperatures 95⁰F / 35⁰C
degrees. Bring the LAN2620 e-Bike indoors and deflate the tires to 58.5PSI. If the PSI too high and the tire
are exposed to excessively high temperatures, riding outdoors may cause serious damage to the tire
including but not limited to stretching and/or rupturing.
Page 9
